question

jayoung avatar image
jayoung asked

No Analog inputs shown on cerbo gx.

Originally was showing temperature and tank options in menus. While installing resistive tank sensors the cerbo GX rebooted. now all analog options are blank. The tank over view page shows no tanks connected and no options for temperature sensors available. How can I get those items to show again? It seems like the cerbo GX hardware may have faulted out.

cerbo gxTemperature Sensorgx devicetank monitoranalog
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
svaeolus avatar image
svaeolus answered ·

Sounds similar to my experience:

https://community.victronenergy.com/questions/87083/cerbo-gx-analog-inputs-vanished.html

End result after a lot of back and forth was a warranty replacement

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andresmoya avatar image andresmoya commented ·
How can I trouble shoot this, having same issue, on my second cerbo after returning first because of same issue.
0 Likes 0 ·
andresmoya avatar image
andresmoya answered ·

How how can I trouble shoot, having same issue and on on my second cerbo

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.