question

corriadale avatar image
corriadale asked

Victron quattro virtual switches

Hi I have a victron quattro 48v 70amp 5kw inverter I am completely of grid with no sure power. I would like to have my generator to come on when the batterys get low. I have wired to the k1 swicth with the 12 feed to common and then switch wire to n/open. I have set up the switch via the configuration via lap top but yet the still wont work it like they just there for show. I set it for generator control and set the voltage and the percent when I wont it to come on but yet they dont do anything. Not sure if I have missed something.

Thank you in advance


virtual switch
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Can you make some screenshots of the settings?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

corriadale avatar image corriadale commented ·

Hi there having a slight problem with lap top but will se what I can do.

0 Likes 0 ·
chenirl avatar image chenirl corriadale commented ·
Will do later today, what stuff in particular?

on Cerbo GX and on the configurator?

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

VE Configure/Virtual Switch

Ignore AC input using the Generator Assistant