Virtual switch vs. ESS

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

oe5nip asked Dec 23, '18

I have a Mulitplus 24/1600/40-16.

I want to load the battery + use the rest active for loads.

If I had no battery + rest from the solar panels (20 % Reserve), I want to change to the normal grid.

I can't find infos to make it with die Virtual switch.

I thought to update to ESS, but is not possible I have an old Firmware 2616413.

If I Register to the homepage (Professional Site) is it possible to update to the latest Firmware.

Software says 2616415 ??

Thanks for your help.

ESS virtual switch

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2018-12-24T02:56:45Z

linqf answered · Dec 24, 2018 at 02:56 AM

You can take a look at this and hope to be helpful.

Good luck.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.