It seems like this was asked quite a bit in previous posts, but no answers come up?
If I connect my Outback charge controller to my Lion Energy bank through the shunt, I get the following issues:
If NEG connected to the BAT side of the shunt, the bank charges nicely but obviously the 712 can't account for the current and pretty much everything reported is off - except the voltage.
If NEG connected to LOAD side of the shunt, the current and numbers are correct, but the lifepo4s won't charge. (current won't backflow through the shunt?)
I know the diagram(s) specify that I should connect NEG to LOAD side, but what am I missing??
Thx