Hello,
I’m installing the Cerbo in my campervan, as it was finished before Cerbo exists I don’t have any way to send the HDMI cable to the GX Touch placement, so I tried:
2 super expensive HDMI to RJ45 adapters
1 cheap HDMI to RJ45 adapter
3 HDMI to 2xRJ45 adapters
4 HDMI with screws to “manufacture” my own cables
Never worked, I’m guessing because:
I‘m not using real RJ45 cables just made them with the cables already in the van, and
The adapters are not bi-directional, so touch information is not going back to the Cerbo.
So, my next idea is to use a Rpi with the 7“ touchscreen with Venus OS installed to control the Cerbo GX using RJ45 as a connection.
is that anyway possible?
Thanks!