This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a new ESS system that only uses AC IN, so the PV system is on the AC IN Side, no loads behind the Multiplus II.
Now i have an example of a coffee machine with arround 1,2kW.
Where do i see the GRID (in my case EM24)...it looks like AC Input as we see the 1259W and the -1145W for compensation.
BUT what does AC Load say???? on L1 i see the sum of the AC Inputs????? and on L1????
Concused....whatever AC Loads means
Thanks if somebody has any clue.
I guess its related...but what does AC-in mean (i guess its the Power going to or from the inverter)...but what is AC-Out....and why L1....
Please check whether your Energy Meter is connected correctly. I think the Input and Output are reversed. In my installation, the Power supply is positive and the feed-in is negative.
Thanks....im my case the feed-in is also negative....if i'm not wrong in terms of reading the scheme, coming from the grid the EM24 L1 goes to 1 and moves to the house installation at Pin3.....isn't that correctly?
But what is this AC-IN L1 and AC-OUT L1 ...which seems to come from the Multiplus
Hi @njordan
is your grid input single phase? if so you've got the grid meter not connected correctly (as it is reading power on L2, and is compensating for that on L1, this makes the values incorrect.
https://www.victronenergy.com/live/energy-meters:em24
No its a 3 phase system with N. So the EM24 is the grid entry point to see the flow for the ESS. See a picture to have more clarity. Left you see the main fuse type NEO and from there the first item is the 1 4 7 from the grid meter. Only what looks strange is the L1 L3 L2 which means that two phases have been mixed up by the energy provider at the grid side.
Maybe i'm wrong - at least the strange values may assume so, but from the official EM24 company website you can see what is anyhow printed on the hardware itself as well.
Ce qui est étonnant c'est que la puissance sur L1 sur AC Load correspond au double de la puissance délivrée par la batterie comme si l'EM24 comptait 2 fois cette puissance. Il faudrait voir un schéma de votre installation
Again, for me its unclear what AC Loads should mean at all. As i have a system where the AC-IN of the inverter is on the same level as the PV installations.....All loads are on the same level as well. So AC-OUT1 and AC-OUT2 is not connected at all. From the schemes by Victron this is a possible setup.
Bien sur que cela fonctionne mais votre EM 24 est raccordé en compteur réseau, comment est compté votre production PV, on ne la voit pas sur votre image CCGX
Ok, I solved this problem. It's the wrong order (L1-L2-L3) of the 3-Phase config Multiplus System settings. That is the main reason for the different AC-Input and AC-Load
