question

anders-rasmussen avatar image
anders-rasmussen asked

Exide ES1350 Charging Specifications for BSC IP22

Hi all,

I’ve bought the BSC IP22 12/30 charger, but can not for the life of me find out what the charging specs are for my GEL batteries. Where do I find this information?

I got two Exide ES1350 120 Ah delivering 12v for house power and a 70 Ah lead-acid battery as starter battery for the engine. Do I need battery presets for both types of batteries?

Thanks,

Anders.

chargerip22
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

@Anders Rasmussen

This link has a little: https://exide.nu/wp-content/uploads/Exide_EXIDE_GEL_ENG.pdf

It's much the same as most Pb batts, and the 'normal' setting would suffice for all three of your batteries.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

anders-rasmussen avatar image anders-rasmussen commented ·

Hi John, thanks for the information - there are a number of “User defined” battery presets that rhymes with GEL batteries- I notice that these charging profile differs from the normal mode, and was told by the vendor who sold me the charger that I should select GEL in the app .. and read in this forum that you should setup the profile to match your GEL batteries as per the specs .. you sure I can use “normal” mode?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic