question

jcolter avatar image
jcolter asked

Blue smart charger Functionality Device/App

A few questions about the Blue Smart Charger IP22 Rev2:

-How does the triple output work, eg have a trailer with main battery bank and then have a secondary battery used with a trolling motor. So the trolling motor needs to be charged independently from the trailer batteries. All batteries are LiFePo4. Will each charge at its own rate and once one gets to the charged parameters stop on its own?

-Are there multiple profiles in the app for each of the 3 lines one the triple output charger?

-Can you enable/disable charging from the app? Can this be done for each of the triple output independently?


chargerbluesmart ip22ip22
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

It is one charger and the outputs are just separated with diodes.

So you have one charge profile for all three outputs and all are charged at the same time.

You can't disable one output or the charger in VictronConnect.

Take a look at the demo library in the App.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.