I have a problem with my Victron.
When the batteries are fully charged, Victron is switching between charging and discharging. at 100% SoC it starting discharging about with 250W for few seconds, then slowly reducing the discharge, then switching to charge again, charging with 250W slowly reducing the charge and start discharging again. There is excessive PV power so the discharge is going to the grid. See video below.
Just in case I'm also attaching my settings from VE Config:
Is it "normal" behavior? is it healthy for the batteries? Should it just charge to 100% and stay there until there is not enough of PV power to balance the load???