This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
1600w Hub-4 system installed 24/3/16 by Mobel Technologies in Bourne Lincs, never been monitored or serviced since as they ceased trading soon after! Ticking along ok but I have some issues with battery discharge as they will only ever go to 95% (all 3 modes) even though minimum SOC is set at 60%. Batteries are 2x lead acid in series i.e. 24v. I have full user control.
According to the dealer list, MeadoTech are probably the closest. Not close at 80 miles, but the closest as far as I can tell.
Dearler list: https://www.victronenergy.com/where-to-buy
This UK winter, systems with "Battery Life" enabled are suffering from the minimum state of charge gradually rising to high levels due to the batteries never having had a good full charge in the last few week of foul weather and miserable skies that we have been experiencing.
Thanks for that but Meadowtech refuse to take on a system they have not installed themselves so I remain abandoned by Victron!!
