This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
VictronConnect app will not see a device because the current firmware is very old (version 1.07) I see the minimum version needs to be 1.09 but I cant find any way to update to 1.09 or later
The serial port sends every second the following data:
manf Victron Energy
prod MPPT 12..24V/15A
ser# HQ12477WV5J
ver# 1.07
Checksum H
Any idea of how to update this device over a serial port?
A BlueSolar MPPT don't have build-in Bluetooth only the SmartSolar have it.
You will need a VE.direct to USB cable or a VE.direct Bluetooth dongle.
Hello,
try VE Power Setup to update the firmware
VE Power Setup is for VE.Can products.
https://www.victronenergy.com/live/ccgx:ccgx_ve_power_setup
For VE.direct products is you should use VictronConnect.
Why should he use the the old software instead of the new one?
That firmware version is quite old, about 7 years I think. Just give it a try after victron connect seems not to work properly. I'd like to think that a VE.direct to USB cable has already been used, of course. @DanielD cable needs galvanic isolation so a normal cable won't work.
@Porcini Thank you for the suggestion, it was a good one but unfortunately VE Power Setup also does not detect the device running v1.07, it does see v1.46 that I also have so the setup is correct.
