question

danield avatar image
danield asked

How to update BlueSolar MPPT 75/15 firmware v1.07 to the latest version

Hi
VictronConnect app will not see a device because the current firmware is very old (version 1.07) I see the minimum version needs to be 1.09 but I cant find any way to update to 1.09 or later
The serial port sends every second the following data:
manf Victron Energy
prod MPPT 12..24V/15A
ser# HQ12477WV5J
ver# 1.07
Checksum H

Any idea of how to update this device over a serial port?

firmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

A BlueSolar MPPT don't have build-in Bluetooth only the SmartSolar have it.
You will need a VE.direct to USB cable or a VE.direct Bluetooth dongle.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

porcini avatar image
porcini answered ·

Hello,

try VE Power Setup to update the firmware

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

VE Power Setup is for VE.Can products.

https://www.victronenergy.com/live/ccgx:ccgx_ve_power_setup

For VE.direct products is you should use VictronConnect.

0 Likes 0 ·
porcini avatar image porcini Matthias Lange - DE ♦ commented ·

What do you think was used before VC was released? :)

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic