Our system configuration: Lynx Ion BMS 1000A + 2x LiHE 100 Ah batteries + Venus GX + Multiplus 2
Question 1 - When have powered the Venus GX from pin A1 & A6. At what battery voltage & SOC will the BMS stop sinking power from the battery? We are concerned that the batteries may run 100% flat.
Can you further explain 1.3.2 Storage instructions of a complete system (Lithium-ion batteries with BMS) of the manual?
Question 2 - How do you change the minimum SOC from 30 % to a lower number. Is there any issue running the batteries to 5% for example? When running the unit we expect the Multiplus 2 to cut out on low voltage, but the unit allow to discharge prevented any further discharge from the batteries at 30% SOC.
Question 3 - How do you program B5&6? Is there a list of CAN instructions