question

Pat Davitt avatar image
Pat Davitt asked

Clearing lynx ion bms history removes SOC information

I just cleared the Lynx Ion BMS History using my CCGX and to my surprise it also removed the SOC information. Is this the normal behavior? If so, it would be nice if their was a warning in the documentation. I wanted to set a new baseline for temps, voltage, charging, and discharging.

Thanks,

Pat

BMS
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ commented ·

Oh No!

I can help update system manuals if they can be improved.

Would you expect to read about the behaviour of interaction in the Lynx Ion Manual, CCGX manual, both or somewhere else as well?

0 Likes 0 ·
Pat Davitt avatar image Pat Davitt Guy Stewart (Victron Community Manager) ♦♦ commented ·

Guy,

Thanks for the info. I think the Lynx Ion Manual would be best since, in this case, all the CCGX is doing is sending a command to the BMS.

Pat

0 Likes 0 ·
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

A note to adjust the Lynx manual to reflect this behaviour has been passed on to that team.

Thanks for reporting this.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic