when batteries being charged from alternator the volts jump up to 14.1 but the battery % continues to decrease

I have a multi plus 12/3000,connected to a BMV battery monitor and a CCGX colour screen - when on shore line the batteries charge normally and the CCGX shows 100% charge batteries full. However when I disconnect the shoreline and run the engine over a four hour period the batteries are going down as well as the percentage - have had the alternator checked and the cables from the batteries to the shunt have been tested with a clamp meter for the amps and voltage but the equipment is not detecting any amps volts etc - any ideas?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) ♦♦ commented · Mar 12, 2020 at 10:13 AM

Could you draw a diagram of how it is all connected?

My first guess is the battery and the alternator have a connection to the chassis of the vehicle as a negative path, and are bypassing the BMV (which requires it is the ONLY thing connected to the battery negative, and all current to pass through it) before going to the chassis.

0 ·

Show more comments