Hi Everyone,
Just setup my Pi with a Multiplus 2
Trying to add the device to the online portal- asking for VRM Portal ID.
Where would that be ? I have tried the WiFI MAC and it does not work .
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Everyone,
Just setup my Pi with a Multiplus 2
Trying to add the device to the online portal- asking for VRM Portal ID.
Where would that be ? I have tried the WiFI MAC and it does not work .
Hi @Craig_D86, I added the answer as item 10 in the rpi getting started manual:
https://github.com/victronenergy/venus/wiki/raspberrypi-install-venus-image
enjoy your system! Matthijs
Hello,
Thanks for your response.
is this what you are referring to ?
"Open a browser, and navigate to the ip address, for example http://192.168.52.3. If all went well, you will see the Remote Console page loading, and will be able to browse the menus. "
If so, this is not what i am looking for.
below is a screenshot of where i am trying to add the R Pi to victrons online portal.
Additional resources still need to be added for this topic
Raspberry Pi running Victron’s Venus firmware - Blog Post
Venus OS Large image: Signal K and Node-RED - Install
raspberrypi install venus image
14 People are following this question.