This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi everyone.
I've been a new Victron user for only a few months. I have a 100/30 mppt with dongle its all working fine on a iPhone and Mac then last week i got a ip65 12/15 (to keep batteries charged in the uk winter gloom) it connected ok on the iPhone but the Mac now can't find any device at all. Any ideas please.
Is Bluetooth working on your Mac, when you connect to other devices?
Yes all other devices are in the bluetooth list on the Mac but the 100/30 and ip65 can't be found but was last week. but all ok on iPhone.
Maybe this helps: http://osxdaily.com/2015/12/15/reset-bluetooth-hardware-module-mac-osx/
Thank you for the information. I've tried resetting 3 times to make sure. other devices have connected ok but no victron devices ? must be the app on the mac.
Same here. Not working with MBP 10.13.6 and headquarters don't have the answer (and can't be too bothered). MBP BT working fine with other devices.
Firmwares/drivers/etc. up-to-date.
Only iPhone connects to the 75/15 MPPT without trouble.
Hopefully the next update will solve the problem.
