question

RickS avatar image
RickS asked

Quick view vs. Details page

Today I finished my Lithium battery install and updated the Victron shunt settings when I noticed the quick view voltage was different then the details page

Quick view shows 13.41v

Details page shows 13.22v

Am I missing something?screenshot-20240726-182826.pngscreenshot-20240726-182813.png

voltage
screenshot-20240726-182826.png (136.4 KiB)
screenshot-20240726-182813.png (116.9 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@RickS

Since it is part of a smart network you would need to check if it is an artefact of the network.

0 Likes 0 ·
2 Answers
RickS avatar image
RickS answered ·

TY, since I don't use the smart network, I'll remove it and try again

However, one would think the values would match either way

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

Point of the smart network is in case there is mismatch then it can be compensated for.

Glad you are sorted though.

0 Likes 0 ·
RickS avatar image
RickS answered ·

BDH here...

When I connected up my batteries to complete the work, I wasn't feeling well and actually put both Pos and Neg on the same battery (correct posts...) , rather than the Pos lead on 1 battery and the Neg to the shunt from the other battery

After fixing that issue, now both quick view and details view read the same


Thanks all

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic