question

dc51 avatar image
dc51 asked

How can i control a Smart Switch RF 433Mhz with my Victron Cerbo GX?

Hello Community,

See attached photo. What do I need to buy and configure so I can control these Smart Switches which run on RF 433Mhz through my Victron Cerbo GX?
f8cf163a-1281-4238-ba07-a300d05960df.jpg

Thanks in advance,

Damian

cerbo gx
f8cf163a-1281-4238-ba07-a300d05960df.jpg (76.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
dc51 avatar image
dc51 answered ·

Bump - can anyone help?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alex Pescaru avatar image
Alex Pescaru answered ·

Hi @dc51

For sure those switches have some remote controls.

A simple way to do it is to dismantle the remote and use the GX relay to "simulate" the button press on the remote.

Problem is that you have at least 3 switches - as seen on the picture - and the GX has only 2 relays.

Alex

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dc51 avatar image dc51 commented ·

Thanks for reply Alex. Is there another piece of hardware i can get to receive the RF commands from these switches and accept these through the Cerbo or other Victron device as I have a total of 9 smart switches I would like to be able to control through the Victron touch screen / app? Thanks again.

1 Like 1 ·
Show more comments