The circuit board in one of my Skylla-TG 24/100 has a blown fuse. It's hard to access on the board and so far no luck extracting it. A - is this typically replacable/ known issue. B - can the entire board be replaced?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi @rhroberts,
It depends which fuse has blown. From the manual:
A broken input fuse. -> Return the charger to your dealer.
The output fuses are broken. - > Replace the output fuses.
Output fuses - 8 x 20A
It's not one of those. It's buried on the board, pic attached. It's crumbled due to trying to remove it. And, after further inspection, the varistor behind it (to the left in the pic) is chared/ damaged/ broken.
Additional resources still need to be added for this topic
9 People are following this question.