question

lwysocki avatar image
lwysocki asked

Dynamic ESS Minimum Dynamic ESS SOC

Hey
Documentation for Dynamic ESS in step 2 referes to:
Configure Dynamic ESS SoC - The Minimum Dynamic ESS SOC

But does not specify "where" this config parameter is available. I don't see it within dynamic ess config (any step).
I don't see it in dynamic ESS setings in cerbo console.

Where can I find it?

-- thanks, Lukas


screenshot-from-2024-07-05-10-57-55.pngscreenshot-from-2024-07-05-11-02-06.png

dynamic ess
screenshot-from-2024-07-05-10-57-55.png (126.8 KiB)
screenshot-from-2024-07-05-11-02-06.png (41.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
grua avatar image
grua answered ·

A seperate minSOC for DESS doesn't exist any more. There is now only one single minSOC.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lwysocki avatar image
lwysocki answered ·

1. thank you for response and info

2. :(
We are left only with "minimal SOC unless grid fails".

Hmm, that's sad,
as I see consumption forecast wrong, and schedule to sell most of stored energy from battery to grid in the evening ... which means I will need to buy it back over the night (at higher price).

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Barbara (Victron Energy) avatar image Barbara (Victron Energy) ♦ commented ·
Hi @lwysocki , we will roll out a feature towards the end of July where you can set a time and SOC, and DESS will make sure your battery is charged to that SOC by the set time.
4 Likes 4 ·
Show more comments