Hi
Updated GX firmware to V3.33 a few weeks ago, but have not updated Victron Multiplus II software.
All seems to be running fine, but just had a quick look at system and it says Recharging (on VRM webpage).
Batteries had got down to 21% and solar was slowly charging the batteries. Charge was scheduled for midday to top them up from mains as that's a cheaper price than now.
Minimum SOC (unless mains fail) had changed to 85%!
So system was doing a full(ish) charge.
I used to get the sustain kick in every so often on the older software, is this the similar?
Or do I need to change a setting to stop this minimum SOC being changed. As I normally just manually setup the cheapest charge slots from the grid and this has always worked well until now. Ideally don't want the system charging when it wants on higher priced slots.
No errors reported from battery or system
Any help appreciated thank you.