question

thunderboss avatar image
thunderboss asked

Is anyone else having issues with connecting via Bluetooth to a EasySolar II GX

When i try and connect to the device from with Victron Connect App. It show device and allows you to enter the factory passkey (found on device) and tries to connect then come up with error message as shows. When i check my phone it show a connection is made with Bluetooth to device but that is it. Tried using a different phone and tablet also the same problem. Also tried the network reset button. no luck

screenshot-20240617-144352.jpg screenshot-20240617-131034.jpg

Bluetooth
screenshot-20240617-131034.jpg (430.0 KiB)
screenshot-20240617-144352.jpg (330.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·

Bluetooth was cerbo only as far as I remember.

Even then it is only for initial network configuration or for supported iot devices like ruuvi.

All documented in the manual.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image
Duivert NL answered ·

easy solar 2 (GX) doesnt have bluetooth ... only the built in smartsolar mppt has

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

thunderboss avatar image thunderboss commented ·
Then why does it have it as available to connect to within the devices menu in victron connect then. I'm not convinced if is correct.
0 Likes 0 ·
Show more comments