The advanced tab is missing to prioritize energy sources. Multiplus ii, Color Control. Software is updated, Version 2780491. I can't figure it out.
asked
VE Configure Advanced Tab Missing
What version of VE.Config do you have?
The MultiPlus needs to be at FW 506 or higher.
https://www.victronenergy.com/live/ve.bus:solar-and-wind-priority
VE Config 3, top left corner of the pic. Version shows 491, but when checking for updates, states it is updated. Can I download the FW506 to a thumb drive and upload to the Color Control?
491 is the FW of your MultiPlus, to see the version of VE.Config I think you have to go "help" (can't check it right now)
To update the FW of the MultiPlus:
OR
https://www.victronenergy.com/live/venus-os:remote_ve.bus_firmware_updates
OR
https://www.victronenergy.com/live/updating_firmware:updating_ve.bus_products
VE Config 3 shows on the help, just as in the pic. Checking for updates on the Color Control state up to date, also checked compatibility and it's good, (purchased everything this last year) and I'm not seeing the ability to update on the VRM, nothing below the devices on the device list like the video.
