question

t-roy avatar image
t-roy asked

VE Configure Advanced Tab Missing

ve-configure-3.jpgThe advanced tab is missing to prioritize energy sources. Multiplus ii, Color Control. Software is updated, Version 2780491. I can't figure it out.

VEConfigure 3
ve-configure-3.jpg (111.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

What version of VE.Config do you have?

The MultiPlus needs to be at FW 506 or higher.

https://www.victronenergy.com/live/ve.bus:solar-and-wind-priority

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

t-roy avatar image t-roy commented ·
VE Config 3, top left corner of the pic. Version shows 491, but when checking for updates, states it is updated. Can I download the FW506 to a thumb drive and upload to the Color Control?
0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ t-roy commented ·

491 is the FW of your MultiPlus, to see the version of VE.Config I think you have to go "help" (can't check it right now)

To update the FW of the MultiPlus:

https://www.victronenergy.com/media/pg/VictronConnect_configuration_guide_for_VE.Bus_products/en/firmware-updates.html

OR

https://www.victronenergy.com/live/venus-os:remote_ve.bus_firmware_updates

OR

https://www.victronenergy.com/live/updating_firmware:updating_ve.bus_products

0 Likes 0 ·
Show more comments