question

smclaren avatar image
smclaren asked

Victron Energy BMV-712 Battery Monitor - Does it have Battery Discharge Protection ?

Hi Guys

Just bought a Victron Energy BMV-712 Black Battery Monitor ... just waiting for it to arrive.

One question I do have.

Does it have a Battery Discharge Protection function ... meaning that it will shut down/turn-off the batteries at a pre-set voltage, so no further drain of the battery will occur ?

I see it has an alarm ... but wondering if there is a shut down/turn off function at a prescribed voltage.

I see it also has a "Programmable relay, to turn off non critical loads or to run a generator when needed" ... but not sure this will turn everything off ?

Or ... do I need to install a specific Battery Discharge Protector Module ... something like this unit -> https://www.jaycar.com.au/battery-discharge-protector-module-m148a/p/AA0262

I'd appreciate an answer on this question

Steve

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Justin Cook avatar image
Justin Cook answered ·

The BMV is a battery monitor only, it does not natively control charge or discharge of the batteries in any way.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

smclaren avatar image
smclaren answered ·

Thanks for the email, Justin.

Hoping that I can get an explanation in layman's terms on how the "Programmable Relay" works on the BMV-712 monitor ... and can it be used as a proxy to obtain the functionality that I am looking for ie not allowing batteries to drop below a prescribed voltage.

Thanks

Steve

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
Open victron in the demo library look up the bmv in there. Then llay with the theoretical settings there.

But it basically opens or closes based on settings.

The manual has the information you need

1 Like 1 ·
Show more comments
Sarah avatar image
Sarah answered ·

Hi @smclaren Have a look at the battery protect devices. In addition to being voltage sensitive it could be controlled by the BMV relay to utilise state of charge (connecting the BMV relay to the remote port on the battery connect).

https://www.victronenergy.com/battery_protect/smart-battery-protect?_ga=2.35687712.1267870328.1717193730-1971747421.1717066448

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.