question

Luis Rascão avatar image
Luis Rascão asked

Spontaneous single reboot after power up (Multiplus 5k)

Today i had to power down my Multiplus 5k (230V) to connect the battery cables (no battery still), last time i had to power it down i also noticed this. About 5 minutes after it gets internet access (through the Cerbo GX) it restarts once, after that it stays in normal operation, no errors are shown or nothing. It just reboots, it's as if after it connects to VRM it gets an instruction to restart. I'm puzzled why this happens, anyone noticed this as well?

Multiplus-II
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Luis Rascão

It shouldn't be switched on without a battery. It is a battery based system. So i am not surprised.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Luis Rascão avatar image
Luis Rascão answered ·

But everything does work without a battery minus this single phantom reboot after initial startup so that doesn't really explain it

4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image Duivert NL commented ·

its designed to work with a battery connected as alexandra already stated, so you can get all kinds of unexpected errors without

0 Likes 0 ·
Luis Rascão avatar image Luis Rascão Duivert NL commented ·
i get that, but i don't see any errors anywhere, VE Bus errors have nothing, leds show no errors as well. If it's an unsupported scenario you'd expect that to surface somewhere right? Suppose i had batteries and they "disappeared" from the MK2 perspective, what is it going to do?
0 Likes 0 ·
Show more comments