How do I add MPPT RS 450|200 to a Multiplus II GX + Pylontech system?
When I connect it to the VE.Can port nothing happens, if I switch VE.Can port to VE.Can + 250 kbit BMS, Multiplus sees the MPPT charger, but can't see the battery.
Please help.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
How do I add MPPT RS 450|200 to a Multiplus II GX + Pylontech system?
When I connect it to the VE.Can port nothing happens, if I switch VE.Can port to VE.Can + 250 kbit BMS, Multiplus sees the MPPT charger, but can't see the battery.
Please help.
Hi if it has a VE direct port use that instead of VE can, you can only connect the pylontechs to the multiplus 2 GX, not in combination with other products on the same VE can
Yes, thats the only way, you need a VE direct cable, the multiplus gx is limited in connections
But then it will work fine
I have 3 multiplus 2 (one GX) in 3 phase setup with pylontech us5000 batteries and 6 mppts on ve direct
Also isn't ve.direct a poin-to-point interface? How do you connect multiple mppts to it?
Yes VE bus syncs the mutliplusses
You can use one VE ditect device directly, the others are on a good quality powered usb hub with ve direct to usb converters
i also have energy meters connected to that same hub
there is a limit on ve direct devices, different on every gx device, on multiplus 2 gx its 25
Victron Pylontech battery compatibility guide
Additional resources still need to be added for this topic
143 People are following this question.