How do I add MPPT RS 450|200 to a Multiplus II GX + Pylontech system?
When I connect it to the VE.Can port nothing happens, if I switch VE.Can port to VE.Can + 250 kbit BMS, Multiplus sees the MPPT charger, but can't see the battery.
Please help.
asked
Multiplus 2 GX + Pylontech + MPPT RS 450|200
Hi if it has a VE direct port use that instead of VE can, you can only connect the pylontechs to the multiplus 2 GX, not in combination with other products on the same VE can
Yes, both multiplus gx and mppt rs devices have ve.direct port. So, I need a ve.direct cable and this is the only way?
Yes, thats the only way, you need a VE direct cable, the multiplus gx is limited in connections
But then it will work fine
I have 3 multiplus 2 (one GX) in 3 phase setup with pylontech us5000 batteries and 6 mppts on ve direct
Thanks. How do you sync the Multiplusts if ve.can is occupied by your batteries? Do you use ve.bus?
Also isn't ve.direct a poin-to-point interface? How do you connect multiple mppts to it?
