Hi Everyone.
I've detailed my initial system diagram here. My system now includes an EM530, connected using RS485.
I'm noticing three distinct issues.
- My PV Inverter won't show if I set it as Position: AC Input 1, Phase: Split Phase (L1+L2) (which is how I've got it setup physically).
- Yesterday, I setup ESS to have Grid Metering: External Meter. When the PV Inverter started producing, there was an alarm of high DC Voltage, and the whole system shut down. I had to restart everything. Needless to say, I reverted the settings to have Grid Metering: Inverter/Charger.
- The Voltages reported in one of the screens of the EM530 is absurdly wrong: L1-L2: ~160V, L1-N: ~86V.
If anyone can help figure this out, I'd appreciate it. The reason I got a Grid Meter was to have my PV inverter show up in the right spot and to be able to really measure our consumption.
Thanks,
- Ricardo