Hi all,
I'm trying to connect an EVCS to my Cerbo. The EVCS is running an old version (V3.3/1.21) and as I understand, the only way to update is through VRM, hence connection to Cerbo is required.
Both the EVCS & the Cerbo are on the same local network, though not on the same wifi since they're ± 100m apart. I can connect to both devices their web interface (local IP) so I guess the networking is fine.
I've set the Cerbo's IP in the ModbusTCP IP address setting on the EVCS and I've added the EVCS IP in the Cerbo's Modbus devices but it's not showing up..
Any help? Thanks!