question

jolilo avatar image
jolilo asked

ESS + Multiplus II GX can you program a charging mode as the two-position switch under the device

ESS Multiplus II GX can one program a "charge only mode", according to a time slot or a relay

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @jolilo,

As far as I know, it is not possible to adjust the behaviour of that switch.

Default behaviour is described here.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jolilo avatar image
jolilo answered ·

hello, Guy

Thank you for your reply

ok but can you program it software

an operation loads the day excess production and discharges the night

I did a test with this function ESS but did not work

cordially


4.png (29.4 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sean avatar image sean commented ·

The feature you have illustrated enables charging (from the grid) to be scheduled.

0 Likes 0 ·