This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
MultiPlus-II 48/3000/35-32
SmartSolar MPPT Ve.Can 1500/100 rev2
Battery Pylontech LiFePo
Hi
i want to set my Victron to is ON Grid only if Battery is full charged ca 100%-98%.
It is possible ?
Thanks
Battery:
100-98% - On Grid
98-20% - Off Grid
20-0% - On Grid
Overloaded - On Grid
Off Grid - I mean island mode
HI @Beeda
How would you ever get to <98% if you're using grid above 98%? As in if the grid goes down?
The way I would do this is with node red.
if( SoC => 98 || SoC <= 20){ //if greater than 98% or less than 20%
//set ESS mode to Keep batteries charged.
}else if (SoC >20% && SoC <98%){ if soc in between 20 and 98
//ESS mode Optimised without battery life
}
For this Logic funktion i need any special thing, or wher can i this sett ?
Agree with matt1309 that nodeRED is best way to build custom functionalities.
But what is reason to go island mode? If you just set Grid set-point to 0 and limit feed-in to 0 on those periods when want to not use grid. That can be achieved by using nodeRED setting these parameters.
