I'm working with an installer for a set up in my 50 amp RV. We're going to install a MultiPlus-II 12V-24V 3kVA 2x120V which connects to both RV 50 amp L1 and L2 lines.
We're planning on using the AC-out-2 output for loads that should not be run from battery power, e.g. the air conditioner. The AC-out-1 output will be used for loads that can run from battery power.
I have read the user manual several times, but am unsure of this: If the inverter main switch is in the OFF position, and shore power is available, will the inverter pass through both L1 and L2 lines?
The user manual doesn't answer this.