question

mosquito52 avatar image
mosquito52 asked

RemoteGPIO cannot enable it!

Hi community,

After install SetupHelper,GuiMods,RemoteGPIO, from GitHub, cannot enable RemoteGPIO, under Settings/I/O/RemoteGPIO, thanks in advance for any help!

VRM
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

Firmware version etc?

Which mod did you use, what device are you running it on?

0 Likes 0 ·
mosquito52 avatar image mosquito52 Alexandra ♦ commented ·

screenshot-2024-04-20-093056.pngscreenshot-2024-04-19-211624.pngHi Alexandra,

Thanks for Your answer, the device is Cerbo GX with version 3.30, add some pictures
0 Likes 0 ·
screenshot-2024-04-19-211624.png (16.9 KiB)
screenshot-2024-04-20-093056.png (27.1 KiB)
3 Answers
derrick thomas avatar image
derrick thomas answered ·

Have you tried rebooting the device? If you have terminal access you can check the logs and see if there is anything there.

cat /data/log/rgpio_driver/current

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mosquito52 avatar image
mosquito52 answered ·

Hi Derrick, 

Thanks for the answer, "yes" reboot more than once, I'll try to check the logs.
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mosquito52 avatar image
mosquito52 answered ·

Hi Alexandra and Derrick,

After uninstalling and installing again, reboot, and everything works fine. Thank You both for Your support.
Is there any possibility in the Cerbo GX of assigning a function and conditions of different sensors, for example temperature, as with the internal relays, at the moment it is only possible to use relay 1 or 2 that are previously assigned, will it be possible to assign any of the external ones?
Thanks in advance.
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

derrick thomas avatar image derrick thomas commented ·
The possibilities are almost endless using node red.
0 Likes 0 ·
Show more comments