question

kevstone122 avatar image
kevstone122 asked

Write Smart Shunt in Node Red

Hello together,


i just looked in Node Red and found no possibility to write some parameters to the Smart Shunt. Read is possible with the blue nodes, but no write.

For example the actual "SOC value" or "Synchronise SOC to 100%" i cannot activate via NodeRed.


With bluetooth and VictronConnect App over VRM - Tab it is possible.


Can we add this feature to NodeRed?


Best regads

Kevin

SmartShuntNode-REDSOC
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
derrick thomas avatar image
derrick thomas answered ·

Have you checked the 'custom' victron node? Some things can be done with the custom nodes that cannot be done with the standard victron nodes.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevstone122 avatar image
kevstone122 answered ·

Now i try it with it. It was working. I can set the SOC level. I am nut sure, if it will be the same like the button "SOC to 100% synchronize" in the Victron Connect app.

You know this?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevstone122 avatar image kevstone122 commented ·

Looks like this:1713173055303.png

0 Likes 0 ·
1713173055303.png (8.1 KiB)