I have a Multiplus 2, 48/10000 and according to the hand book that came with it, I should use 2x 50mm battery cables if under 5m. Thats two positive and two negative in parallel.
The multiplus does have two terminals on each + and - (4 in total) so connecting two red and two black wires is easy, but i'm a bit stuck as to how to connect the other ends of the cables.
I need to add an inline mega fuse to the positive wires but the fuse holder only has one terminal, same goes for the isolation switch, it only has 1 terminal.
So do i stack the two wires onto the single terminals, or do i need another busbar after the fuse and switch?
Or to simplify things should i fit a 70mm or 95mm single cable instead? The maximum length would be 1m per cable. (i'm still in planning stage, so nothing is fitted yet)