This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
17Perth_20190819-1000_to_20190819-1507 1.pdfI am getting error in VRM data for the inverter but no code. Normally during the night i would get low pv error codes and the like. but in the day every now and then i have Error but no code.
Multi with a Fronius Primo on the AC out 1. grid. the Fronius is on the router via an ethernet cable. so comms should not be an issue? how can i track down this error message?
attached a sample of data.
Hi @Keith Arnold, was this resolved? If not, then I’m quite sure that this a known Fronius issue: when the fronius databus is overloaded this might happen; nothing to worry about but it does mess up the graphs.
We’re working on a fix; expected somewhere in 2020 Q1 or Q2.
The error still persists. It seems to only be the information of amount of pv and does not noticeably influence the control, if at all. But jaa great if it can be cleaned up. And yes it is related to the timeout question.
If i dont get an answer to one i try a different w, related
