question

julian avatar image
julian asked

CCGX/Multi not taking into account solar input (sometimes)

Hello,

I have my system running scheduled charging (from grid) starting 8:00am until 10:30am.

I have seen periods where there is more than enough solar availability but it's not being inverted for charging and/or covering consumption:

as seen directly in the console:

and also as seen directly from the sky:

but after a while it goes back to normality and solar becomes main input

can anyone help to understand the reason this happens? It's very usual and I don't know how to limit it.

Thanks in advance.



MultiPlus Quattro Inverter Chargerbattery chargingESSCCGX Color Controlsolar
solar-yield.png (24.4 KiB)
console.png (36.3 KiB)
roof-view.png (119.1 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Julian, sorry for the slow response; I suppose no one here knows whats going on.

was the issue resolved? Do make sure to run the recent Venus OS version, currently v2.42. Iirc, there have been a few fixes to scheduled charging.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ commented ·

Ps. See change log on https://professional.victronenergy.comfor details

0 Likes 0 ·
julian avatar image julian mvader (Victron Energy) ♦♦ commented ·

Hi,

I think it's happening again, just now we are having a sunny morning. It's 9:38am yet but I guess we should get some PV energy there, at least for covering AC Loads?

Venus was updated to latest version, multi isn't, yet with 2620(460)

Happy Christmas and thanks four your answer.

0 Likes 0 ·
ccgx-status-1.png (32.3 KiB)
the-morning.png (71.0 KiB)
JohnC avatar image
JohnC answered ·

Hi @Julian. I think your chargers are just competing with each other. The one that reaches (it's own) Absorb setting first will back off, and if the other has a slightly higher setting(s), will continue and push the other off.

Try resetting your grid charger settings lower than the solar ones, even the grid one to a flat 'Float' V setting, again lower than the Float on the solar cc. The solar will then take priority. Having 2x chargers attempting an Abs cycle each day may not be great practice either

Maybe you have good reason, but seems strange to have grid top-up at sunrise, when good pv charge is imminent. I do mine at dusk (when necessary) after the solar has had it's chance over the course of the day.

Compliments of the Season to you too. And may 2020 never see another of your questions 'missed'.

6 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

julian avatar image julian commented ·

Hi @JohnC, firstly thanks for your answer, no need to compliments as we are all here to help when we can, not always anyone have all the knowledge :-)

Thing is that, theorically, there is only one 'Float V' setting, located at multi, as my SolarCharger is remotely managed from there. So the value you put in multi flash settings are those being used also by the SC. Isn't it? Might be I'm wrong through...

Happy Christmas!!

0 Likes 0 ·
Show more comments
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Julian

are you using DVCC? if so you could try without to see the changes.

Your battery voltage doesn't look healthy, or is it a very small battery? if not a very small battery: maybe it's time to replace it, and very carefully check the charging / discharging voltages with the manufacturers recommendations.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

julian avatar image julian commented ·

Hi @Daniël thanks for your comments. No, I'm not using DVCC. Yes, I know batteries are not in their best state, also charging / discharging voltages are within the manufacturer parameters.

2 serial banks of 4 220Ah / 12v batteries conected in paralel having then a 440Ah / 48v system. About 4-5 years old.

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ julian commented ·

Hi @Julian

if not using DVCC: make sure your MPPT's are set to a fixed absorption time, and on a higher absorption voltage than the Multi.

if all this doesn't help: have an installer check your wiring and settings.

0 Likes 0 ·
julian avatar image julian Daniël Boekel (Victron Energy Staff) ♦♦ commented ·

Hi @Daniël thanks for your directions. Yes I'll check with my installer in order to solve the issues.

Please, could you help me with this VEConfig question, if you thing it should be solved privately my mail is jhernanz (at) gmail. I need to change this to Spain instead of Italy

Thanks in advance.

0 Likes 0 ·
grid-password.png (76.4 KiB)