question

Mag. Roman Janacek avatar image
Mag. Roman Janacek asked

Victron with Deye DEYE AI-W5.1

Are there any experiences and suggestions how to integrate/use Deye DEYE AI-W51 lifepo4 batteries with Victron?

Lithium Battery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·

That is a question for Deye.

They are an unsupported brand, in the absence of comms, it would require a shunt and old fashioned voltage control. Rather buy a supported battery, plenty of official and third party variants.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mag. Roman Janacek avatar image Mag. Roman Janacek commented ·

So what supported battery do you then recommend:

My requirements:

- IP 65

- Temp Range -20 to about 50°

- 50 kwh (expandable)

- 48 V System

- built in extinguishing device would be nice


0 Likes 0 ·
Show more comments
jonofe avatar image
jonofe answered ·

If Deye batteries fullfill all these requirements, why not looking for a Deye inverter, that fits to these batteries?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

euro avatar image euro commented ·
because in combination/co-existence with a (bigger) grid connected inverter, there´s a painfull feed-in limit configured in all Deye inverter

by example, the sun5klp1 stops poduction when overall feed-in exceeds 5500W and battery SoC 100%

with a second grid connected 15kW inverter also used for AC loading, this limit sucks and stops Deye PV production before lunch (for 4-6h every summer day)

waiting for a firmware update since last year, tried with several Deye support contacts. no success

0 Likes 0 ·

Related Resources