question

jcottis avatar image
jcottis asked

Multiplus-II Serial Number not showing

Hi, for some reason the Multiplus-II Serial Number is not showing, any clues why?

1709358927734.png


Multiplus-II
1709358927734.png (96.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@jcottis

Look under devices list section not under firmware update section.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

suttridge avatar image suttridge commented ·
I think the OP's point is that on this firmware updates page, all the other devices show their serial numbers, so why can't the Multiplus show there as well ?

I know the device list page does show the Multiplus serial number, so why not this page ? This has actually been like this for a long time ...

Steve.

1 Like 1 ·
nickdb avatar image nickdb ♦♦ suttridge commented ·
It may have been intentional for an update, as it is not necessarily updating a single inverter, it could be doing a parallel set, or a 3-phase system, which would not have just one serial number, which is why those details are all on the device info page,
1 Like 1 ·
Show more comments
jcottis avatar image
jcottis answered ·

Thanks all for your responses.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.