question

marceldb avatar image
marceldb asked

EV charger does not update firmware

I received my brand new EV charger with display recently. It has connected to VRM and is visible in Cerbo GX. When I try to update the firmware from 1.21 to 1.27, error 1302 appears. In addition: the charger webpages does not offer the option to upload the firmware.

The WIFI signal is pretty strong, the Cerbo has a LAN ethernet connection.

How to solve this?

1709292807903.png

1709292832055.png

firmware updateev charger
1709292807903.png (53.9 KiB)
1709292832055.png (58.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

5 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Can you try a few times please? If it's not working, please contact me.

The option to upload firmware through the webpage was added in 1.23 if I remember correctly

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marceldb avatar image marceldb commented ·
I tried it over and over again, during several days. So if you can help me with this, I would appreciate it
0 Likes 0 ·
dennibu avatar image dennibu marceldb commented ·

Ich musste auch ein Update von 1.21 auf 1.23 durchführen. Leider gibt es bei 1.21 weder die Möglichkeit per Webinterface noch Bluetooth. Ich musste es 8-10 Mal ausprobieren, bis es endlich klappte. Ab 1.23 ist dies problemlos über das Webinterface möglich.

0 Likes 0 ·
marceldb avatar image marceldb dennibu commented ·
Ist ein Update von 1.21 nach 1.23 leichter durch zu führen?
0 Likes 0 ·
dennibu avatar image dennibu marceldb commented ·

I don't know. I only had to update 2 times from 1.21 so far and that was 2 years ago. Since then I have had at least 1.23 and I have always done it via the web interface.

However, the problem is known and persistent repetition was always the solution.


0 Likes 0 ·
marceldb avatar image marceldb commented ·
How can I contact you?
0 Likes 0 ·
kennybuntinx avatar image
kennybuntinx answered ·

I have exactly the same issue going from 1.27 to 1.28 ...same thing - it is not network related .

please advise @Lucian Popescu (Victron Energy Staff)

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·

So you cannot update from VRM? If yes, please have a look here: https://community.victronenergy.com/questions/276002/fw-update-ev-charger-failed.html?childToView=276061#comment-276061
Please keep me posted.

0 Likes 0 ·
david-callebaut avatar image
david-callebaut answered ·

same here

Fout

De 2 weg communicatie service van de site reageert niet meer. Controleer de internet verbinding en/of probeer opnieuw

Error: 1302

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·

Yes, please update using the method described in the other post ( link above)

0 Likes 0 ·
mito555 avatar image
mito555 answered ·

Same problem here 1.27 --> 1.29. I can't find the download file (I'm not a Victron professional) so I can't install it through the website of the EV Charger. I don't have any problems with SSID.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
You can create an account, it is simple and free. And you will be a professional after :)
0 Likes 0 ·
Show more comments
Martin Opdebeeck avatar image
Martin Opdebeeck answered ·

Same Issue Here. 1.27 >>> 1.28 however the update worked yesterday on site of my son . But here errors only on EVCS update. Cerbo GX update and MPPT updates worked perfectly

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·

Known issue, it will be fixed in Venus OS v3.31

0 Likes 0 ·
Martin Opdebeeck avatar image Martin Opdebeeck Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Great !

Thks




0 Likes 0 ·