This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I received my brand new EV charger with display recently. It has connected to VRM and is visible in Cerbo GX. When I try to update the firmware from 1.21 to 1.27, error 1302 appears. In addition: the charger webpages does not offer the option to upload the firmware.
The WIFI signal is pretty strong, the Cerbo has a LAN ethernet connection.
How to solve this?
Can you try a few times please? If it's not working, please contact me.
The option to upload firmware through the webpage was added in 1.23 if I remember correctly
Ich musste auch ein Update von 1.21 auf 1.23 durchführen. Leider gibt es bei 1.21 weder die Möglichkeit per Webinterface noch Bluetooth. Ich musste es 8-10 Mal ausprobieren, bis es endlich klappte. Ab 1.23 ist dies problemlos über das Webinterface möglich.
I have exactly the same issue going from 1.27 to 1.28 ...same thing - it is not network related .
please advise @Lucian Popescu (Victron Energy Staff)
So you cannot update from VRM? If yes, please have a look here: https://community.victronenergy.com/questions/276002/fw-update-ev-charger-failed.html?childToView=276061#comment-276061
Please keep me posted.
same here
Fout
De 2 weg communicatie service van de site reageert niet meer. Controleer de internet verbinding en/of probeer opnieuw
Error: 1302
Yes, please update using the method described in the other post ( link above)
Same problem here 1.27 --> 1.29. I can't find the download file (I'm not a Victron professional) so I can't install it through the website of the EV Charger. I don't have any problems with SSID.
Same Issue Here. 1.27 >>> 1.28 however the update worked yesterday on site of my son . But here errors only on EVCS update. Cerbo GX update and MPPT updates worked perfectly
Known issue, it will be fixed in Venus OS v3.31
