An old install (10+ years), I have connected recently the temp probe via T-Sence in the Quattro.
Is it a plug and play only, or should I do some configuration in the CCGX?
asked
Quattro Temp sensor (T-Sence) - Only plug and play or should it be activated
Thank you for the reply.
Ok, should I do also a "calibration" on the Quattro (the same as I did on the Multi earlier today i.e. Superuser)?
Also, this would mean that the quattro will use this temp value during the charge cycle?
In the inverter itself (since it was designed for there) no there doesn't need to be a calibration.
I still check though.
It is used for temp compensated charging in lead acid systems and low cut off for lithium.
