This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have the MPPT 100/20 controller but have never used the load output. The controller had two 100w solar panels connected and I seek any advice on how to connect a charger to the load output for a 36v electric bike charger. How feasible is the by connecting a 12v to 36v DC TO DC converter please?
It would probably be better to connect the bike charger directly to the 12V battery rather than the load output. You might find the bike charger overloads the load output.
Ok thank you for that I was trying to keep the charging of the bike batteries separate from the leisure batteries, so there is no practical use of the MPPT load output for this use case then?
