question

rhys-parfitt avatar image
rhys-parfitt asked

Cerbo GX No analogue input after firmware update

Hi

I no longer have any analogue inputs available in IO setting on my cerbo GX after updating the firmware. If I install the beta firmware they come up and I can see my tank sensor. Has this been identified as an issue with the new firmware update? The tank sensor is working perfectly, just that there is no analogue input once I update the cerbo.

cerbo gxfirmware update
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Which firmware version has the problem?

Which beta version works?


0 Likes 0 ·
Show more comments
1 Answer
ejrossouw avatar image
ejrossouw answered ·

@Rhys Parfitt Some information on the problem and resolution can be found here. https://community.victronenergy.com/questions/256461/v3142-available-for-testing.html

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rhys-parfitt avatar image rhys-parfitt commented ·
Thanks mate
0 Likes 0 ·