Hi experts,
Desperately need your support, situation as follows..:
- Multiplus II, Cerbo GX, 2 x Pylontech US3000C (37A current limit each = 74A)
- DVCC limits disabled on Cerbo GX display (NO 35A limit)
- Pylontech parameters correctly visualized (74A):
Initially the system was configured according to Victron's tutorial, using "Remote VEConfigure" in the VRM portal. I have been gradually able to upload new configuration files with increasing amperage (1A->5A->35A). Trying to increase/remove this boundary however on the Cerbo's display had NO impact (increase the charge current limit nor disabling the limit, with or without reboot).
What can I do to further increase the limit from 35A->74A, since VEConfigure only allows me to modify this value up to 35A (as seen below)?
AC Charge limit is not constraining (set to 12A), neither should the SOC (59% currently).
Many, many thanks in advance..