Hello;
I have a Multiplus ii system installed with a cerbo Gx with 5 pylon tech batteries.
I’ve allowed the ESS grid assistant and when I’ve gone to the cerbo remote console, it’s saying there is NO ESS ASSISTANT FOUND.
This makes me believe that the inverter is not showing on cerbo. I’ve connected the Ve bus RJ45 from inverter to cerbo as shown in cerbo manual.
when the inverter is on, I have ac in and ac out on the ac out 1, however AC 1 will only be powered by battery and the AC in will only work when the batteries require charging. Once the batteries are fully charged then the inverter will shut down.
Can anyone advise on what to do next? Thanks.