This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hello, the setting up the 4th system with dynamic ess, but coming to this issue, regardless of what i try and set the values to. it also doesn't indicate which value is not acceptable.
see the attached screen shots
system 10 kva quattro, 14 kwh pylontech, pv grid tie inverter, and pv charger.
An update on this. As far as we could find, this only happens on 3.13. That version does not yet support restrictions, 3.14 will, but that is not out yet. Because the restrictions where not there, the configuration could not continue.
We've adjusted the logic behind that to disable restrictions in the configuration for systems running 3.13, allowing the configuration to continue.
I have the same problemen with an installation. Whatever I tried, nothing made a difference.
I even reset the multis and setup the whole systemen again from scratch.
I hope somebody knows what to do.
even using edge i cannot setup this installation
48e7da884b21 also i have not been able to use beta vrm for almost a week, it just freeezes when i select a installation, i have managed to log in via microsoft edge today. i tried setting up this installation again using edge just now and the same error . |
Aha That makes sense. Thank you very much for the Swift help in this. Since a few minutes ago DESS is functional.
