This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
i have an exsisting system based on an multiplus II whit ess assistant.
i expanded the system whit an other multiplus and set up the fases.
now i can't seem to get the menu for setting up assistance.
not by downloading file from vrm or whit an bus mk3 adaptor, both relaunch me to set up fases again.
any idea's?
Yes, tried both downloading file from vrm and whit the bus converter. Works perfectly when I originally installed the single unit now whit 2 in parallel, I can only get phase configuration.
You need to look at the training then. You right click and select ve configure multi in the ve bus configurator.
